PUMP-OFF CONTROL LOAD CELL HLHO-18A (CLTH14P)

PUMP-OFF CONTROL LOAD CELL HLHO-18A ( CLTH14P)

FEATURES:

*Barrel type structure, Nitrogen filled and welding sealed, anti-corrosion.

* High combined accuracy and reliability (do not use semiconductors for compensation) and easy installation.

* Use for pump- off control in oil field automation and other on-line force measuring.

* Fully comply with the relevant standards of CSA for IS Entity Class I, Division 1, Groups ABCD and Non-incendive Class I, Division 2, Groups ABCD.

SPEDIFICATIONS:

Rated capacity:        0 ~ 10T  ~ 35 T;

Non-linearity:                0.03%FS / 0.05%FS   

Hysteresis:                 <0.03%FS  

Repeatability:              <0.03%FS   

Output full scale:      2.0 mV ± 0.1%;

Zero offset:                  ± 1%FS;

Temperature Span:

     Zero:                                         ± 0.04%FS/10℃

    Output:                                       ± 0.04%FS/10℃

Operating temperature:                        -40 ~ +85 ℃;

Input resistance:                                800 Ohm  ± 5%;

Output resistance:                              700 Ohm  ± 1%;

Insulation resistance:                          > 500 M Ohm

Excitation voltage:                             15 VDC

Hermetical sealed:                               Nitrogen gas filled;

Safe overload:                                   150% FS

Ultimate overload:                              200%FS

Connector:                                     Shielded Cable or Molex 6-pin connector